FS2002 Concorde Real Panel v3.0 (22th of April, 2003)
For use with ProjetMach2 from FsFrance
Accurate, high-resolution, photoreal panel of the Concorde. Based on technical photographs of Concorde. More accurate and better-looking than the one available at ProjetMach2 which was an original of Adnane Bourja and modified by Loïc Londinfer of FSFrance.
Some new and revised features on version 3.0:
Features new photoreal gauges: AGWarn, BrakePress, CoAsMach, CONCORDE, DME. Some of them specifically designed for the Concorde.
Credits:
Thanks to Eric Marciano for the "TCAS radar" gauge that is very good indeed.
(And, off course, thanks to Microsoft for the standard gauges).
To be used with the Concorde from "ProjetMach2" of FsFrance with "Concorde Real Flight Dynamics" by Pedro Oliveira.
Technical Notes:
There is no "autobrake" function available.
Like the real Concorde, the "lights switches" do not appear on the left side of the panel as does on most of other panels. It will appear in future releases at proper location (overhead panel). It is better not to place the switches rather than placing them at the rong place!
The custom. gauges should be used with high-resolutions modes: 1152x864 and up. If used with lower than 1152x864, the main photoreal gauges will look like the standard FS2000 old set from Microsoft.
Use with "full screen" mode for correct display.
The objective is to make the most accurate possible panel for the Concorde.
Important: better have installed first the Concorde available at ProjetMach2, then overwrite the panel folder of Concorde aircraft with this one or rename the old panel (if there) and install this one in replace, and do not forget to copy/overwrite the gauges to the FS2002 directory with these new provided.
If you have any questions/suggestions, just e-mail me.
