FS2002 Concorde Real Panel v.2.0 (20th of April, 2003)
Accurate, high-resolution, photoreal panel of the Concorde. Based on technical photographs at Concorde SST site (http://www.concordesst.com/), similar but more accurate and better-looking than the one available at ProjetMach2 which was an original of Adnane Bourja and modified by Loïc Londinfer of FSFrance.
Some new and revised features on version 2.0.
Also features custom. photoreal gauges designed specifically for the Concorde.
Credits:
Thanks to Eric Marciano for the "TCAS radar" gauge that is very good indeed.
(And, off course, thanks to Microsoft for the standard gauges).
To be used mainly with the Concorde from "ProjetMach2" of FsFrance and with "Concorde Real Flight Dynamics" by Pedro Oliveira.
Technical Notes:
There is no "autobrake" function available.
Like the real Concorde, the "lights switches" do not appear on the left side of the panel as does on most of other panels. It will appear in future releases at proper location. It is better not to place the switches rather than placing them at the rong place!
The custom. gauges should be used with high-resolutions modes: 1152x864 and up. If used with lower than 1152x864, the main photoreal gauges will look like the standard FS2000 old set from Microsoft.
Better use with "full screen" mode for correct view.
The objective is to make the most accurate possible panel for the Concorde.
My custom. gauges:
"CoAsMach.gau"
"AGWarn.gau"
"CONCORDE.gau" (MS gauges edited)
Important: better have installed first the Concorde available at ProjetMach2, then overwrite the panel folder of Concorde aircraft with this one or rename the old panel (if there) and install this one in replace, and do not forget to copy/overwrite the gauges to the FS2002 directory with these new provided.
If you have any doubts/questions/suggestions, just e-mail me. Please, do not hesitate to send your own impressions.
