Posky AutoBrake Panel for 4 engine aircrafts Version1.0

This set includes Posky Autobrake Panel set for 4 engine aircraft(Can also use for 2 too but the code supports 4)

A .... How to install
~~~~~~~~~~~~~~~~~~~~~~~~~
1. Copy the Pky_Autobrake folder to the Panel folder of the aircraft
2. Add lines to the panel.cfg

Under is the example

[Window Titles]
Window09=Posky_AutoBrake

[Window09]
VISIBLE=0
position=2
size_mm=64,64
child_3d=0
background_color=0,0,0
ident=Posky AutoBrake
gauge00=Pky_Autobrake!Pky_Autobrake_Init, 0, 0
gauge01=Pky_Autobrake!Pky_AutoBrake_Panel, 0, 0
gauge02=Pky_Autobrake!Pky_AutoBrake4, 0, 0

B .... How it works
~~~~~~~~~~~~~~~~~~~~~~~~~
There are RTO , OFF , 1 , 2 , 3 ,MAX mode

RTOMode
When Aircraft is on ground and set to RTO mode
And Throttle lever moves up more than 70% and speed became faster than 50kt.
Will be aimed.
When Throttle lever gets lower than 70% will be automatically brake and open the spoiler
Will stop braking at 50kt.

OFF
Mean OFF

1 , 2 , 3 , MAX
When Aircraft is on ground and set will be aimed.
When the aircraft touches down and both gears are compressed.
Will start working ... spoilers and brakes will be used until the aircraft gets slower than 50kt.
The difference of 1,2,3,MAX is the brake power.
1 --- 20% 2 --- 40% 3 --- 60% MAX --- 80% which seems same as MS default Autobrake.

Have fun landing.

Copyright 2008 Hiroshi Igami/ProjectOpensky.
This is a freeware and no support , use at your own risk.
And cannot include in any payware except getting permissions.
For contact , visit www.projectopensky.com and send message from the forum.