ga_hangars_ss_vol_2_v1_installation.txt inside ga_hangars_ss_vol_2

GA Hangers SS Volume 2 Version 1 scenery objects
by Sidney Schwartz
sidney.schwartz@comcast.net

I decided to learn to use Google Sketchup, so you get some more hangers. :)

These GA hangers are of the long narrow variety that I've not made before. Some are detailed, some are very plain for those situations where you need to place large numbers of hangers. This is a standard FS9 object library compatible with EZ-Scenery and Instant Scenery. I have also included thumbnails and other files to make it easier to use these objects with RWY12, Luis Sá's Sbuilder and Jon "Scruffyduck" Masterson's Airport Design Editor 9x.

*****************************
IMPORTANT IMPORTANT IMPORTANT
*****************************
There are two different installation procedures for this scenery object library, "RWY12" and "Everyone Else". The "RWY12" instructions are ONLY for those who will be using the RWY12 program to place these scenery objects in FS9. Install the library using the "RWY12" procedure ONLY if you are creating your own scenery using RWY12! If you are installing the library because you have downloaded a scenery that requires it, follow the "Everyone Else" installation procedure!

The "Everyone Else" installation procedure is for users of EZ-Scenery, Instant Scenery, and pretty much any other program that can be used to place scenery library objects in FS9, EXCEPT RWY12. It is also for anyone who is not creating their own scenery but is installing this library because they have downloaded a scenery that requires it.

============================
RWY12 Installation Procedure
============================
1. Unzip ga_hangars_ss_vol_2_v1.zip to a temporary location. You should end up with four folders: ADE9X, ALL USERS, RWY12, and SBuilder. You should also have a text file called PLEASE READ.txt and some jpg files. The jpg files can be deleted.

2. Open the ALL USERS folder. Move ga_hangars_ss_vol_2_v1.bgl into your FS9/Addon Scenery/Static Objects Library/Scenery folder. If you are also using the Instant Scenery or EZ-Scenery programs, also move ga_hangars_ss_vol_2_V1.txt into that same folder, otherwise ignore it.

3. Move all the bmp files into your FS9/Addon Scenery/Static Objects Library/Texture folder.

4. Open the RWY12 folder. Move add_ga_hangers_ss_vol_2_v1.xml into your Rwy12 Object Placer/Rwy12 folder. Move the entire add_ga_hangers_ss_vol_2_v1 folder, not just its contents, into your Rwy12 Object Placer/Rwy12/img folder.

You're done. The next time you run RWY12 ga_hangars_ss_vol_2_v1 should appear in your Category list, and you should see thumbnails of these objects and be able to place them in FS9.

====================================
Everyone Else Installation Procedure
====================================
1. Unzip ga_hangars_ss_vol_2_v1.zip to a temporary location. You should end up with four folders: ADE9X, ALL USERS, RWY12, and SBuilder. You should also have a text file called PLEASE READ.txt and some jpg files. The jpg files can be deleted.

2. Open the ALL USERS folder. Move ga_hangars_ss_vol_2_v1.bgl into your FS9/Addon Scenery/Scenery folder. If you are using the Instant Scenery or EZ-Scenery programs, also move ga_hangars_ss_vol_2_V1.txt into that same folder, otherwise ignore it.

3. Move all the bmp files into your FS9/Addon Scenery/Texture folder.

OR: If you know how to create and use scenery folders, you may install these files into a scenery folder of your own.

You're done.

================
ADE9X
================
If you are using ADE9X to place scenery objects in FS9, this will allow you to view thumbnails of these objects while placing them. Do the following AFTER you have completed one of the installation procedures above.

1. Go to wherever you unzipped ga_hangars_ss_vol_2_v1.zip and open folder ADE9X.

2. Move the entire ga_hangars_ss_vol_2_v1.bgl FOLDER, not just its contents, into your Airport Design Editor 9X/FS9/Thumbs folder.

3. If you haven't already, add these objects to the ADE9X Library Object Manager. Consult the ADE9X manual for instructions. Once you've done this, you should see a thumbnail of each object and be able to place the objects in FS9.

========
Sbuilder
========
If you are using Sbuilder to place scenery objects in FS9, do the following AFTER you have completed one of the installation procedures above. This procedure requires that you know how to edit text files.

IMPORTANT: These instructions were tested with Sbuilder version 2.05 revision 6. That is the most current version as of this writing. If you are using an older revision of Sbuilder version 2.05, this may not work. You should go to http://www.ptsim.com/ and download the most current version.

1. Go to wherever you unzipped ga_hangars_ss_vol_2_v1.zip and open folder Sbuilder.

2. Move obj_ga_hangars_ss_vol_2_v1.txt into your Sbuilder/Tools folder.

3. Open folder obj_ga_hangars_ss_vol_2_v1_sbuilder and move the CONTENTS of the folder into your Sbuilder/Tools/Bmps folder.

4. Using a text editor, open the file objects.txt in your Sbuilder/Tools folder and add the following line:

include=obj_ga_hangars_ss_vol_2_v1.txt

Save and close objects.txt.

The next time you run Sbuilder and click to place an object, you should see ga_hangars_ss_vol_2_v1 in the Objects Category list on the Library Objects tab, and a thumbnail image of each object.

Credits
=======
I use the following programs to make scenery and scenery objects. My sincere thanks to all those, known and unknown, who have created these programs.

Modeling:
Gmax by Discreet
Google Sketchup
MDL Tweaker II by Arno Gerretsen
CAT by Arno Gerretsen

Library BGL
Library Creator by Arno Gerretsen
ModelConverterX by Arno Gerretsen

Object placement:
Instant Scenery by Flight1
Library Object Manager/Scenery Creator by Jon Masterson

Additional files for RWY12 and Sbuilder:
Library Object Manager/Scenery Creator by Jon Masterson

AFCAD modification:
AFX by Flight1
ADEX by Jon Masterson

Terrain modification:
Sbuilder by Luis Sá & PTSim
LMViewer by Jim Keir

Graphics:
Lview Pro by CoolMoon Corp.
DXTBmp by Martin Wright

Terms of Use
============
These scenery objects are freeware. Under no circumstances may they be sold, or incorporated, wholly or in part, into
any payware product. This object library may be made available for downloading from web sites provided the original zip file is uploaded complete and in its original form. If you use objects from this library in your freeware scenery, you may NOT include the library as part of your scenery package...you should instruct the user to download and install it. You may NOT decompile this library in order to recompile some or all of the objects into a new library for distribution with your scenery.