z726kfs9,zip (full fixed)

FS2004 Zlin 726 Trener K


Designer: Capt.I.D'Attomo zlin-726,zip



Install: FS2004 AIRCRAFT\Z726K9
FS2004 GaugeSound.dll


Modifieds-notes:

Sounds and FD for FS9, back seat VC works.
The excellent original Italian Z726 model is a ' K ' version (tail,rudder).
FS9 traditional aerobatics.

Ground gear scrapepoints are set-up for compression,
takeoff/start and touchdown.
Unfortunately this is not same the fs model's gear location.
Included a model gear set-up aircraft,cfg version too under scrapepoint2.

Engine approximate to an M337AK, as
ManPress, Oil- Press and Temp, FuelPress, HP, Compression,
RPM, CHT, Cyl.Disp. and Prop.Diam.
The cyl.numbers and supercharged are not real, needing for fs9 works.

About real Trener sounds with fs9 default start-shutdown sounds.
Try from vertical flight with full power to stop location and
listen the roll up engine ..

The Z526F is the unlimited aerobatics Trener version, the Z726K is not.
The handling realism is rather good for the fs9 (eg.: drived roll ect.)

Good Luck,
GCs
Bp@10