PROCEDURES FOR CARRIER OPERATIONS
T-45 Goshawk
_________________________
PRE FLIGHT
[1] Select the Aircraft/Map menu of FS200
On the Map window that appear
take note of the altitude of the desk.
[2] Open the GPS window and place it
at a convenient place on the panel
[3] Take note of the heading of the oblique
desk.
_________________________
TAKE OFF
[1] Apply the parking brakes
[2] Lower the flaps at the third position
(3 times F7)
[3] Engine at full power
wait until the engine reach his full
power
[4] Release the brakes
_____________________________
CRUISE
[1] Raise the landing gear
[2] Raise the flaps (F5)
[3] If you need to quickly reduce speed
lower the flaps to the
first or second position
BEWARE
DO NOT USE SPOILERS TO REDUCE SPEED
IN CRUISE
______________________________
LANDING
[1] Reduce the power of the engine
[2] Lower the flap by one position
Repeat four times this maneuver
[3] Lower the landing gear
[4] Reduce the power to idle
[5] Approach speed: 120 kts
Landing speed: 115 kts
Ajust the power of the engines
to maintain speed at least 100 kts
[6] At few feet of the desk
apply the spoilers (Press "/")