INSTALLATION GUIDE - RMAF C-130 Hercules set for FS2004. Version 1.1

Extract all the files into your FS2004 root folder. The necessary sub-folders will be created automatically.


1) Engine default

2) Note on DOOR ANIMATIONS : The model has 4 seperate door animations, some keypresses may need to be set up in the Controller Assignments section under 'Settings'.

Crew Door (and cabin windows) : shift-E

Cargo Hold doors - these use the Concorde visor keypress so that they can be opened in flight seperately from the other doors. This keypress is not normally assigned in the FS2004 default setup. To assign it you need to go to the Controller Assignments section under 'Settings'. The model Zipfile inlcudes a useful EXAMPLE SCREENSHOT which shows the screen you need. We recommend assigning the C and V keys for open and close respectively, although there are others you can use if you prefer.

Paratrooper doors - these use the Tailhook keypress so that they can be opened in flight seperately from the other doors. This keypress is not normally assigned in the FS2004 default setup. To assign it you need to go to the Controller Assignments section under 'Settings'. We recommend the 'T' key for this. Ignore the 'tailhook extending/retracting' message which is displayed - unless you fancy a carrier landing ! .

Engine spill vents - these are animated on the normal Cowl Flaps keypress which in FS2004 is ctrl/shift C to close and ctrl/shift V to open (in increments).

3) Note on LANDING LIGHTS - the taxi lights on the main gear doors will remain illuminated after retraction unless you press ctrl-L to turn Landing Lights off.




Repaint: Anoar (Nua_6673)
Model : P Perrott, M Davies