Boeing 737-200 Panel
For FS2002 only (fab732v2.zip)
By Fabrizio Berretta
E-Mail: fablol@libero.it
May 2003
Version 2 of my 737-200 panel for FS2002, now more photoreal.
Panel painting and instruments lay-out based on a real 737-200 cockpit
CREDITS
A lot of gauges included in this panel are repaints of original gauges provided by:
Richard Probst
Staffan Ahlberg
Paul Golding
Olav M. Ronningen
Marcello Lugari
Real flight dinamics by: Kees Van Til
Great thanks to all them for cooperation and the permission to use theirs gauges !!
INSTALLATION REQUIREMENTS:
You need "FSUIPC ver. 2.89" or later for panel working!!! (download it at www.SurClaro.com or www.SurClaro)
If you don' t install FSUIPC autopilot will work bad (increments of 100 or 10 instead 10 or 1 ) and others gauges will not work.
After FSUIPC installation, follow this:
1. Start FS2002
2. Press "Alt" so menu appear
3. Select "Modules" from menu
4. Select "FSUIPC"
5. Select "Technical"
6. Select "Fix control acceleration"
7. Select OK button to save and close FSUIPC window
PANEL INSTALLATION:
1. Unzip "fab732v2_gauges.zip" into your main FS2002 gauges folder: C:\......\Microsoft Games\FS2002\Gauges
If you have already installed others my panels confirm gauges's files overvrite (others panels will work however).
2. Unzip "fab732v2_panel.zip" into your favourite 737 panel folder: C:\......\Microsoft Games\FS2002\Aircraft\....your_737...\panel
(before make a copy of your original "panel.cfg" file)
3. In fab732v2.zip i provided two zip files containing optimized files for two 737-200 models (Yeodesigns and FFX/SGA).
Select your aircraft's zip file and then extract "Boeing737-400.air" and "aircraft.cfg" to your favourite 737 aicraft folder:
(before make a copy of your original "aircraft.cfg" file)
Then start FS2002, go to "aircraft" menu, choose "select aircraft", and select "Boeing 737-200 by Fab ver. 2" from "Boeing" aircrafts.
4. Only if you don' t want to install my aicraft.cfg file (step 3), you have to edit your aircraft.cfg file and modify it like this in radio section:
[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1
// Com.2=1
Nav.1=1
Nav.2=1
Adf.1=1
Transponder.1=1
Marker.1=1
Without this modify, radios will not run.
However if you don' t install my aircraft.cfg file, you will not appreciate real flight dinamcs!!
INSTRUCTIONS:
Virtual cockpit view don't work with this panel!!!
Press "Ctrl + E" for auto engine start-up
Select "GRD" position on engine starters (overhead panel) and then move forward start levers (throttle window) for manual engine start-up
Switch-on "Nav lights" for night lightning (press "Schift + L" to switch-off panel lights during the day)
COPYRIGHT
DO NOT MAKE ANY MONEY WITH THIS PANEL OR ANY OF THE GAUGES.
DO NOT USE ANY IMAGES FROM THIS PANEL OR FROM THE GAUGES IN ANY SORT OF PAYWARE PRODUCTS
DO NOT UPLOAD THIS FILE TO ANY SERVER OR SITE THAT REQUIRES A FEE FOR ACCESS
DO NOT DISTRIBUTE THIS FILE ON ANY "FOR PROFIT" CD-ROMS.
DO NOT USE THE GAUGES IN THE PANEL WITHOUT PRIOR PERMISSION. IF YOU WISH TO USE ANY OF THE GAUGES,
PLEASE CONTACT ME SO THAT I CAN DIRECT YOU TO THE AUTHOR.
THIS PANEL IS FREEWARE. NO MODIFICATION FOR DISTRIBUTION WITHOUT EXPRESS PERMISSION OF AUTHOR.
DO NOT MAKE MONEY WITH THIS PANEL OR ANY OF ITS COMPONENTS! PLEASE ASK THE AUTHOR FOR PERMISSION
IF YOU WANT TO USE ANY COMPONENTS OF THIS ZIP.
DISCLAIMER
IF YOU USE THIS PANEL YOU DO SO AT YOUR OWN RISK. I WILL NOT ACCEPT ANY RESPONSIBILITY FOR ANY DAMAGE YOU
THINK MAY HAVE BEEN CAUSED BY USING THIS PANEL.
THERE IS NOT ANY WARRANTY EXPRESSED OR IMPLIED FOR ANY CIRCUMSTANCE.
COMMENTS, SUGGESTIONS AND CRITICS ARE VERY APPRECIATED.
