1.Description of this aircraft
2.Specification
3.About the installation
4.About the operations
5.About free software
6.About the directions point in FS2004
The Fuji T-1 was Japan's first jet-powered trainer aircraft
The T-1 production model with Bristol Orpheus engine was designated as T-1A, and with a Japanese developed J3-IHI-7B engine was designated as T-1B.
The T-1 has been retired from pilot training squadron, but some aircraft are still in service by 5th Technical Scool based Komaki and Air Development and Testing Wing based Gifu.
Length : 12.12m
Width : 10.5m
Height : 4.08
Wing Area : 22.22 sq m
Aspect Ratio : 4.96
Min Weight : 2,858Kg
Max Weight : 4,355Kg
Power Unit : J3-IHI-7B (Thrust 1,400Kg) X 1
Max Speed : 455 Kt
Service ceiling : 45,500 ft
Duration of flight : 2.05 h
Take off distance : 3,400 ft
Landing distance : 3,600 ft
Crew : 2
-----------------------------------------------------------
[ About the installation ]
The airframe must copy the \Fuji T-1 folder as it is in the Aircraft folder of FS2002 or FS2004.
\FS2002(FS2004)
-----\Aircraft
---------\Fuji T-1
Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
The Gauges of kingair,EXTRA-300 and GPS are not bundled.
Please set up it by yourself.
-----------------------------------------------------------
[ About the operations ]
A special key operation is not used for this model.
-----------------------------------------------------------
[ About free software ]
All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.
1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model.
3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public.
(Please open only the texture to the public. )
4.Don't use DXT format for making texture.
Please make it by the format that everyone can change.
It is necessary to be able to read and change with usual drawing software.
5.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
6.I maintain the copyright of the aircraft model and the panel background.
7.The copyright of the gauge belongs to the author.
---------------------------------------------------------
[ About the directions point in FS2004 ]
This aircraft model is made by using FSDS Ver2.24.
Therefore, it is possible to play basically in FS2004(FS9).
However........!!
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode.
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft.
Afterwards, if this aircraft is selected, it is normally displayed.
*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.
KzIT16643VT@aol.com
2006/02/18
Fukuoka, Japan
*******************************************************************
