*******************************************************************************

BAe Hawk200 (Mk208)

by Kazunori Ito

*******************************************************************************

1.Description of this aircraft
2.Specification
3.About the installation
4.About the operations
5.About free software
6.About the directions point in FS2004 and FSX

*******************************************************************************

BAe Hawk 200 Series
Developed in parallel with the Hawk 100 Series, the Hawk 200 is a single seat, radar-equipped, lightweight, multi-role combat aircraft, and first flew on 19th May 1986. Principal features of the Hawk 200 Series include: a revised forward fuselage with a single place cockpit, a new nose radome housing a Northrop Grumman APG-66H multi-mode, pulse-Doppler radar system, a seven station Combat Wing with Combat Manoeuvre Flaps and wingtip missile launchers, an advanced cockpit layout with Multi- Function Display (MFD) and Hands-On-Throttle-And-Stick (HOTAS) controls, enhanced avionic systems operating via a MIL-STD-1553B digital databus and an uprated Adour Mk871 engine. The Hawk 200 Series features extensive structural and systems commonality, aft of the cockpit bulkhead, with the Hawk 100 Series. Ordered by Oman (Mk203), Malaysia (Mk208) and Indonesia (Mk209).

This model is Type Mk208 of Royal Malaysian Air Force(Tentera Udara Diraja Malaysia:TUDM).

--------------------------------------------------
2. [ Specification ]

Length overall 37ft 3in (11.34m)
Wing span 32ft 7in (9.94m)
Height overall 13ft 1in (3.98m)
Wing Area 179.6sq.ft (16.69sq.m)

Basic Mass Empty 9,810lb (4,450kg)
Max.Take-Off Weight 20,062lb (9,100kg)

Max.Level Speed 550kt /0.83M
Service ceiling 13.715 m
Range 2.428 km without drop tanks.

Crew 1

-------------------------------------------------
3. [ About the installation ]

The airframe must copy the \BAe Hawk200 folder as it is in the Aircraft folder of FS2002 or FS2004.

\FS2002(FS2004)
-----\Aircraft
---------\BAe Hawk200

Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
The gauges of Kingair and GPS are not bundled.
Please setup it by yourself.

-----------------------------------------------------------
4. [ About the operations ]

Shift+"E" = Canopy Open/Shut
"/" = Air Brake(Spoiler) On/Off

................................
!! A special key operation !!
................................

Tail Hook Key ("K") = Drag Chute Out/In
"K" is an arbitrary key that you are setting as Tail Hook key.

************************************************************
* for special key operation, *
* It is likely not to operate according to a set method of *
* your FS or the state of other Add-on tool. *
************************************************************

-----------------------------------------------------------
5. [ About free software ]

All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.

1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model.
and don't covert my airframe for CFS Series.
3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public.
(Please open only the texture to the public. )
4.Don't use DXT format for making texture.
Please make it by the format that everyone can change.
It is necessary to be able to read and change with usual drawing software.
5.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
6.I maintain the copyright of the aircraft model and the panel background.
7.The copyright of the gauge belongs to the author.

---------------------------------------------------------
6. [ About the directions point in FS2004 and FSX]

This aircraft model is made by using FSDS Ver2.24.
Therefore, it is possible to play basically in FS2004(FS9) and FSX(FS10).
However........!!
In FS2004.
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode.
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft.
Afterwards, if this aircraft is selected, it is normally displayed.

And........
In FSX.
Because gauges do not correspond to FSX, the gauges in the cockpit are not displayed.
Please you looks for a suitable gauges and setup Panel.cfg by yourself.
Sorry...............

*******************************************************************
Please Notice

I like military aircrafts. Especially, fighter!!
But, It is because the shape is unique and the manoeuverability is good.
I like aircraft that can freely fly in the big sky.
However............I hate war and combatting.
When I thinks the airframe that I made launches the bullet and the missile, I become scary.
Therefore, I'm prohibiting convert of my airframe for CFS.
If it is possible, I am wishing my airframe not to be used in CFS.
Though you might be said "Because it's simulation world"..........
Please..........Please.......

*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.

KazuIto0926@aol.com

2012/02/24
Fukuoka, Japan
*******************************************************************