DOUGLAS BOSTON MKIII / A-20 HAVOC ALPHASIM's panel ONLY; Updated for FSX by Enrique Medal
=========================================================================================

This alternative 2D & 3D panel is for ALPHASIM' freeware Douglas Boston MkIII / A-20 Havoc (BostonMkIII.zip or alphbst9.zip),
and uses the default's FS2004 gauges of Douglas DC-3, not aported.

I dont know if this panel could be used in Fs2004.

DEFAULT FS2004 GAUGES NEEDED: Douglas DC3.


Installation :

1. Copy new panel.cfg and bitmap files into "panel" folder of your aircraft previously downloaded.

2. For use in FSX, should be replaced (or added if not) the following lines into the file aircraft.cfg:


//LINES TO REPLACE/ADD in FSX (for the correct functioning of gauges)----------------------------

[autopilot]
autopilot_available=1
flight_director_available=0
pitch_takeoff_ga=0.0
default_vertical_speed=700.000000
autothrottle_available=0
direction_indicator=1
attitude_indicator=1
max_pitch=10.000000
max_pitch_acceleration=1.000000
max_pitch_velocity_lo_alt=2.000000
max_pitch_velocity_hi_alt=1.500000
max_pitch_velocity_lo_alt_breakpoint=20000.000000
max_pitch_velocity_hi_alt_breakpoint=28000.000000
max_bank=25.000000
max_bank_acceleration=1.800000
max_bank_velocity=3.000000
max_throttle_rate=0.100000
nav_proportional_control=9.000000
nav_integrator_control=0.250000
nav_derivative_control=0.000000
nav_integrator_boundary=2.500000
nav_derivative_boundary=0.000000
gs_proportional_control=9.520000
gs_integrator_control=0.260000
gs_derivative_control=0.000000
gs_integrator_boundary=0.700000
gs_derivative_boundary=0.000000
yaw_damper_gain=0.0
default_bank_mode=2 //Default to Heading Hold

[direction_indicators]
;/1 Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro, 3=Electro-Mag Slaved Compass, 4=Slaved to another
;/2 Indicator number of slaving indicator if Type = 4
direction_indicator.0=1,0
direction_indicator.1=2,0

[attitude_indicators]
;/Type: 0=None, 1=Vacuum Gyro, 2=Electric Gyro
attitude_indicator.0=1
attitude_indicator.1=2

[altimeters]
altimeter.0=1
altimeter.1=1

[turn_indicators]
;/Type: 0=None, 1=Electric Gyro, 2=Vacuum Gyro
turn_indicator.0=2,0

[Radios]
;/ Radio Type = availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1, 0
Com.2=1, 0
Nav.1=1, 0, 1
Nav.2=1, 0, 0
Adf.1=1
Adf.2=1
Transponder.1=0
Marker.1=1

//END OF LINES TO REPLACE/ADD in FSX.------------------------------------


=============================================================================================
NOTE: In FSX, if the starters does not work, simply change the following value in aircraft.cfg:

[piston_engine]
...
normalized_starter_torque= 0.35
=============================================================================================

This is freeware and is not to be sold or used to make money in any way.


Aug 2011

Enrique Medal
emedal@arquired.es