1.Description of this aircraft
2.Specification
3.About the installation
4.About the operations
5.About free software
6.About the directions point in FS2004 and FSX
The Reggiane Re.2001 Falco II was an Italian fighter aircraft, serving in the Regia Aeronautica (Italian Air Force) during World War II.
A contemporary of the renowned Macchi C.202, the production of this type was to be limited to only 252, but it was a flexible design that proved to be able to undertake a number of roles.
Thanks to its manoeuvrability it could dogfight with more powerful opponents like the Supermarine Spitfire.
The Re.2001 became the basis of a later, more formidable fighter, the Re.2005.
Length: 8.36 m (27 ft 5 in)
Wingspan: 11 m (36 ft 1 in)
Height: 3.15 m (10 ft 4 in)
Wing area: 20.4 m2 (219.58 ft2)
Empty weight: 2,495 kg (5,500 lb)
Loaded weight: 3,280 kg (7,231 lb)
Powerplant: 1~ Alfa Romeo RA 1000 RC 41-la Monsone (license-built DB 601A-1), 871 kW (1,175 hp)
Maximum speed: 542 km/h (337 mph)
Range: 1,100 km (684 mi)
Service ceiling: 11,000 m (36,090 ft)
Rate of climb: 780 m/min (2,591 ft/min)
Wing loading: 32.93 lb/ft2 ()
Armament:
Two 12.7 mm Breda-SAFAT machine guns in upper cowling
Two 7.7 mm Breda-SAFAT machine guns in wings
Crew: 1
-------------------------------------------------
3. [ About the installation ]
The airframe must copy the \Re2001 folder as it is in the Aircraft folder of FS2002 or FS2004.
\FS2002(FS2004)
-----\Aircraft
---------\Re2001
Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
The gauges of GPS are not bundled.
Please setup it by yourself.
-----------------------------------------------------------
4. [ About the operations ]
-----------------------------------------------------------
5. [ About free software ]
All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.
1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model.
and don't covert my airframe for CFS Series.
3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public.
(Please open only the texture to the public. )
4.Don't use DXT format for making texture.
Please make it by the format that everyone can change.
It is necessary to be able to read and change with usual drawing software.
5.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
6.I maintain the copyright of the aircraft model and the panel background.
7.The copyright of the gauge belongs to the author.
---------------------------------------------------------
6. [ About the directions point in FS2004 and FSX]
This aircraft model is made by using FSDS Ver2.24.
Therefore, it is possible to play basically in FS2004(FS9) and FSX(FS10).
However........!!
In FS2004.
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode.
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft.
Afterwards, if this aircraft is selected, it is normally displayed.
And........
In FSX.
Because gauges do not correspond to FSX, the gauges in the cockpit are not displayed.
Please you looks for a suitable gauges and setup Panel.cfg by yourself.
Sorry...............
I like military aircrafts. Especially, fighter!!
But, It is because the shape is unique and the manoeuverability is good.
I like aircraft that can freely fly in the big sky.
However............I hate war and combatting.
When I thinks the airframe that I made launches the bullet and the missile, I become scary.
Therefore, I'm prohibiting convert of my airframe for CFS.
If it is possible, I am wishing my airframe not to be used in CFS.
Though you might be said "Because it's simulation world"..........
Please..........Please.......
*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.
KazuIto0926@aol.com
2010/06/22
Fukuoka, Japan
*******************************************************************
