This aircraft is an completely unknown aircraft.
In the WWII end, it is one of the original bills of the aircraft development that a German air force planned.
Delta wing aircraft....again.
It is Nightfighter that the Arado Co. developed by using the technology of E555/1.
It certainly looks like.
Therefore, though I likes and made it......
However, it did not go well very much.
Originally, the airframe and the wing are connected a little more smoothly.
Though 3D graphic published in the magazine was better-looking.........
But, You must be not anxious because a real machine must not exist.
Well, well......................
This aircraft was developed as a nightfighter.
The development of two kinds of quite different airframes was ordered to the Arado Co. at 1945.
In contradiction to the airframe composition that Project 2 is very orthodox it,Project 1 adopted a large-scale delta wing, and the mount was done in parallel behind the airframe as for the engine.
It had to take notice of nightfighter Mosquito at the same time as intercepting the strategic bomber.
30mm machine gun in nose, diagonal machine gun in the back, and rear machine guns.
And, it seems that this aircraft with the speed that exceeds 800 km/h had domination very much in the arena of warfare.
However, the end of the war has been faced to our regret at the stage where the specification of the airframe is investigated thoroughly.
Postwar days, VOUGHT F7U-1 Cutlass was developed referring to the technology of this P1.
Max Speed : 810km/h
Power : HeS011A Turbo Jet x2
Crew : 2 or 3
Armer : Mk213 30mmGun x4
500kg Bomb x2
-----------------------------------------------------------
[ About the installation ]
The airframe must copy the \Ar Project I folder as it is in the Aircraft folder of FS2002 or FS2004.
\FS2002(FS2004)
-----\Aircraft
---------\Ar Project I
Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
EXTRA300, Beech_Baron, GPS gauges are not bundled.
Please introduce it by yourself.
-----------------------------------------------------------
[ About the operations ]
A special key operation is not used for this model.
Shift+"E" = Canopy Open/Shut
"/" = Air Brake
-----------------------------------------------------------
[ About free software ]
All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.
1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel it of the aircraft model.
3.Please open only the texture to the public when you open the repaint to the public.
(Opening in the state to bundle my aircraft model to the public is prohibited. )
4.Don't use DXT format for making texture.
Please make it by the format that everyone can change.
It is necessary to be able to read and change with usual drawing software(PaintShop, Photoshop etc.).
5.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
6.I maintain the copyright of the aircraft model and the panel background.
7.The copyright of the gauge belongs to the author.
---------------------------------------------------------
[ About the directions point in FS2004 ]
This aircraft model is made by using FSDS Ver2.24.
Therefore, it is possible to play basically in FS2004(FS9).
However........!!
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode.
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft.
Afterwards, if this aircraft is selected, it is normally displayed.
*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.
Kazu16643VT@aol.com
2005/01/15
Fukuoka, Japan
*******************************************************************
