<< Panel Lights for Project Fokker's Fokker 70/100 V2 Panel (FS2004) >>

This is Light panel addon for Project Fokker's Fokker 70/100 V2 Panel.
You can get this Panel on

http://fokker.avsim.net


This Light Panel is made by Jun182 (Yoo Sang Jun) with fully permission from Project Fokker's Fokker 70/100 V2 Panel.


This panel is made for the freeware Panel user, to give more reallistic FS circumstances.
I also added gauge file to use light panel and lightened windows with simple click button.
Light panel will controll by clicking special gauge icon on the panel.

!! You may use night lighting everytime. In real cockpit is pretty dark even at noon. so I made lightings could use everytime (bright lighting). !!

This Light panels contains 2 lighting version with each sub panel's lightings.
(But you can may use maximum 6 lightings by panel lighting switch on/off - located on the overhead panel. )


************ Please read before using **************



In the zipped file, there are Panel.cfg file and a folder named 'fokker panel lighting' which contains bunch of BMP files and xml gauges.

1. Extract zipped file into temporary folder
2. Copy 'PF10070v2_panel' folder in the zipped file to FS Aircraft folder (To overwrite original panel folder)

or

1. Extract zipped file into temporary folder
2. copy Panel.cfg file in the 'PF10070v2_panel'folder to project fokker original panel folder(PF10070v2_panel) and overwrite original one.
3. Copy a folder "fokker panel lighting" into 'project fokker panel folder(PF10070v2_panel)' also.
(DO NOT COPY 'fokker panel lighting' folder INTO MAIN GAUGE FOLDER.)

*folder tree*

FS Main folder
-Aircraft
- PF10070v2_panel <-- [Panel.CFG and light panel BMPs]
- fokker panel lighting <-- [XML gauges and gauge BMPs]



4. That's It!

** I strongly recommand to install light panel right after install Project Fokker's Fokker 70/100 V2 Panel. then you don't need to edit cfg file **




Added Special Gauge Icons to each light panels.
[Color] 'Night' part to 255,255,255 (maximum)




We added Special 'NEW GAUGE BUTTON'
You can find 'NEW GAUGE BUTTON' on the "PEDESTRAL PANEL". (3 way dial type) ----> See Switch.JPG
You can change main light panels using dial type gauge (3 direction - OFF, ON, DIM)
When change lighting, its sub panels also change automatically.




*Don¡¯t use window open key (combination of SHIFT + number)
*You must open/close window panels by clicking Lighting Switch Gauges.
*When you use light panel. This panel is not replace base panel. It covered base one. So this may cause of some decrease fps. You will maintain at least two panels on same time (base main panel + Lightened main panel).
*If your system can't get over even 2 panels on at the same time. After light panel on, press SHIFT+1 to close base main panel. And press 'SHIFT+ENTER' or 'SHIFT+Back Space' Key to fix your view. This is not exactly same with base panel¡¯s view. This is temporary solution.
*To use light panel, must Light is on (SHIFT+L or switch on the panel) to use light panel.
*If you will add another window panel (like cd player or fdsfx..). add it after light panel section number in Panel.cfg





Thanks to Project Fokker.
And Big thanks to Jean Van Harten. He made fantastic gauge for light panels. I really appreciate for this.


Base Panel - Project Fokker.
Light panel BMP and Gauge files are licensed by Jun182 (Yoo Sang Jun) , Jean Van Harten


EMAIL : jun_182@hotmail.com
made by Jun182