It is large!!.
Hugeness!!
This is an unexpected size.
I thought that gave up making it by me.
However,in these several months,several making request of B-36 reached me.
For the airframe that the turboprop and the jet mixed,I had made it from the prototype of Germany.
But, it is the first time in an airframe big like this.
Was there a necessity for production really?
Though shape is terrible and interesting......................
The development of B-36 was begun as an aircraft that was able to bomb directly to the Europe Continent from an American mainland in the middle of WWII.
The hugeness of this aircraft doesn't have the one to exceed this now.
However, B-47 of the jet bomber had flown first when the force disposition was begun, and obsoleting became this aircraft.
Still, this long distance air performance doesn't throw away easily, and 380 planes were produced for the nuclear attack and the scout under the east and west cold war.
Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
The Gauges of EXTRA-300, Kingair, Beech_Baron, GPS are not bundled.
Please introduce it by yourself.
-----------------------------------------------------------
[ About the operations ]
Shift+"E" = Exit Door Open/Shut
................................
!! A special key operation !!
................................
1. (Shift+"E")+"2" = Bomb Bay Door and Gun Turret Open/Shut
Shift and "E" are pushed at the same time. afterwards, please push "2".
"2" Key is "2" of the main keyboard.
It doesn't move by "2" of ten keys.
2. Concorde Nose Key = XF-85 Goblin Takeoff / Landing
This key is an arbitrary key that you are setting as key for Concorde Nose operation.
-----------------------------------------------------------
[ About free software ]
All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.
1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel(convert) it of the aircraft model.
3.Please don't bundle my airframe(MDL file) in the package of your works when you open the repaint to the public.
(Please open only the texture to the public. )
4.Don't use DXT format for making texture.
Please make it by the format that everyone can change.
It is necessary to be able to read and change with usual drawing software.
5.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
6.I maintain the copyright of the aircraft model and the panel background.
7.The copyright of the gauge belongs to the author.
---------------------------------------------------------
[ About the directions point in FS2004 ]
This aircraft model is made by using FSDS Ver2.24.
Therefore, it is possible to play basically in FS2004(FS9).
However........!!
For a wide large-scale aircraft, the distortion is caused and the phenomenon of the aerofoil tip's disappearing happens in the spot shooting mode.
If this phenomenon happens, Please switch to the spot shooting mode by using other small aircraft.
Afterwards, if this aircraft is selected, it is normally displayed.
*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.
KzIT16643VT@aol.com
2005/11/17
Fukuoka, Japan
*******************************************************************
