// The Pilot Series Douglas DC3 Turoprop Checklist // // Checklist for Douglas DC3TP made by Chris van Bijlert. // Can also be used on Douglas C-47TP Dakota/Skytrain. // Derived from The SAAF and Professional Aviation's checklist provided by Johan Crous. // Visit The Official Pilot Series Checklist Website: // http://fly.to/pilotserieschecklist // Email me: chrisvanb@geocities.com // // By downloading any of The Pilot Series Checklists®, // you acknowledge and agree to the following terms and conditions of Copyright and Use. // - If you do not agree to these terms, then do not download the checklists/ // - This software is provided to you as is, with no warranties either expressed or implied. // - This software is licensed as FREEWARE, and may not be resold, packaged or otherwise // placed in a medium that is sold, rented, leased or for which a fee is charged // to access this software. // - These checklists are for your private use. You may upload these checklist along with your // own aircraft projects as long as you credit the contributing designer. // If you want to use the checklists on a really big aircraft project, // please contact the contributing designer. // - By downloading checklists from here, you acknowledge the copyright ownership of the // contributing designers and agree to abide by all U.S. and International Copyright // conventions that are in effect at this time. // - You acknowledge and agree that the terms of "fair use" as loosely interpreted // in some countries do not apply, and that strict compliance with copyright laws are required. // - The flightsim community is being trusted with the administration of this copyright and use notice. // Please report any and all violations to Chris van Bijlert via the website // address contained in the file documentation. // - Feel free to upload this checklist along your own freeware aircraft, // as long as you limited it to one single aircraft at a time. If you want to use this checklist // on more than one aircraft at a time please contact me. // But do always keep this piece of text on it and credit the designer(s). // - When downloading and using this checklist you automaticly agree with the Copyright & Use Notice // as stated in this documentation and on the website. // // Copyright (C.) Chris van Bijlert, SAAF, Professional Aviation and Johan Crous [LISTS] 0=&Before Starting 1, Before Starting 1 Checklist 1=&Before Starting 2, Before Starting 2 Checklist 2=&Engine Start 1, Engine Start 1 Checklist 3=&Engine Start 2, Engine Start 2 Checklist 4=&Taxi 1,Taxi 1 Checklist 5=&Taxi 2,Taxi 2 Checklist 6=&Before Takeoff, Before Takeoff Checklist 7=&After Takeoff, After Takeoff Checklist 8=&Top of Climb, Top of Climb Checklist 9=&Approach 1, Approach 1 Checklist 10=&Approach 2, Approach 2 Checklist 11=&Before Landing, Before Landing Checklist 12=&Final Approach, Final Approach Checklist 13=&After Landing Roll, After Landing Roll Checklist 14=&After Landing 1, After Landing 1 Checklist 15=&After Landing 2, After Landing 2 Checklist [0] 0=Seat/Rudder Pedal: ADJUSTED 1=Parking Brake: APLIED 2=Pre-Flight: COMPLETED 3=A/C Docs: SIGNED/ON BOARD 4=U/C Pins: ON ABOARD 5=Locks/Covers: REMOVED/ON BOARD 6=Steps/Ladder: ON BOARD 7=PAX/Freight: BRIEFED/SECURED [1] 0=Battery Master Switches: ON/OFF 1=Bus Tie Switch: CLOSED 2=Fuel Computer: PROGRAMMED 3=Avionic Master Switch: OFF 4=No Smoking/Seatbelts: ON/ON 5=NAV Lights: AS REQUIRED 6=Fuel Booster Pumps: ON 7=Fuel Pressure: 5-50 PSI [2] 0=Ignition Switch: MANUAL 1=Starter Switch: MANUAL 2=Inverter Switch: ON, CHECK VOLTS 3=Avionic Master Switches: ON 4=Engine Instruments: GREEN ARCS EXEPT Np 5=Avionic/NAV Suite: ON/SELECT/TEST 6=Transponder: STANDBY [3] 0=Radar: STANDBY 1=Autopilot: TEST 2=Electric Trim: TEST/SET FOR T/O 3=Propeller Levers: FEATHER 4=Hydraulics: FULL PANEL CHECKS 5=Flight Instruments: ERECT/SET/NO FLAGS 6=Altimeters: QNH SET/CROSS CHECK [4] 0=Brakes: TEST 1=Flight Instruments: CHECK 2=Fuel Management: CHECK 3=P3 Bleed Valves: CLOSED 4=Annunciator Panel: CONSIDER/BRT/DIM 5=Engine Instruments: GREEN ARCS EXEPT Np 6=Auto Feather: ARM [5] 0=Propeller Sync: OFF 1=APR: ARM/OFF 2=Reverse Thrust: ENGAGE/CHECK BETA LTS 3=Flap: SET 4=NAV Aids: SET FOR DEPARTURE 5=Alt Pre-Select: SET FOR DEPARTURE [6] 0=Flight Controls: FREE 1=Seatbelt/Harnesses: SECURE 2=Propeller Levers: INCREASE 3=Condition Levers: HIGH IDLE 4=Anti Col: ON 5=Landing Lights: ON 6=Stall Warning: ON 7=Transponder: ON/STANDBY 8=Trim: CHECK [7] 0=Brakes: APPLY 1=Undercarriage: UP 2=Flaps: UP ABOVE V2+10 KIAS 3=Climb Power: SET 4=Engine Temps/Press: GREEN ARCS 5=Yaw Damper: ON/OFF 6=Auto Feather: OFF 7=Prop Sync: ON 8=APR: OFF [8] 0=Cruise Power: SET 1=Engine Instruments: GREEN ARCS 2=Altimeters: SET 3=Fuel Transfer: AUTO/AS REQUIRED 4=Landing Lights: OFF/ON 5=Ice Protection: SET 6=No Smoking/Seatbelts: ON/OFF 7=P3 Valves/Cabin Heat: SET 8=Galley Power: SET [9] 0=Avionics: SELECT/CHECK 1=Altimeters: SET/CROSS CHECK 2=Radio Alt: SET 3=Flight Instruments: SET 4=V-Speed: REVIEW 5=Approach Procedure: REVIEW 6=Alt Pre-Select: SET [10] 0=NAV/VOR: Switch: SELECT NAV/VOR 1=Fuel Transfer: MANAGE 2=Hydraulics: PRESSURE/CONTENTS 3=Galley Power: OFF 4=Landing Lights: ON/OFF 5=No Smoking/Seatbelts: ON/ON 6=P3 Bleed Valves: CLOSED [11] 0=Brakes: APPLY 1=Undercarriage: DOWN 2=Auto Feather: ARM 3=Prop Sync: OFF 4=APR: ARm/OFF 5=Propeller Controls: 1500/1700 RPM 6=Fuel: CHECK 7=Flaps: SET 8=Flight Instruments: SET [12] 0=Undercarriage: DOWN 1=Flaps: STATE POSITION 2=Yaw Damper: OFF 3=Landing Lights: ON [13] 0=Flaps: UP 1=Propeller Levers: SET INCREASE 2=Reverse Thrust (Above 40 KTS): WHEN REQUIRED 3=Elevator Trim: SET FOR GO AROUND [14] 0=Landing Lights: OFF/ON 1=Fuel Transfer: MANAGE 2=Stall Warning: OFF 3=P3 Bleed Valves: CLOSED 4=Transponder: STANDBY 5=Radar: STANDBY 6=Auto Feather: OFF [15] 0=Prop Sync: OFF 1=APR: OFF 2=Trimmers: NEUTRAL 3=Propeller Levers: DECREASE 4=Condition Levers: LOW IDLE 5=Hydraulic Pressure: SUFFICIENT 6=Flaps: UP/LEVER NEUTRAL
