TAXI*******************************************

HPC levers at high for taxi/takeoff/climb.
11,800 RPM for taxi.

Low stop in "ground" position.

Activate W/M system.

Activate taxi lights/check nav lights.

Begin taxi.


TAKE OFF***************************************

Take off wet=10 degrees flaps/15,000 RPM/TGT 860.

Take off dry=15 degrees flaps/15,000 RPM/TGT 820.

Rotate 105 Kts. climb rate 1100-1200 fpm.

Retract flaps at 1000 ft. AGL.

CLIMB*******************************************

14,500 RPM TGT about 790-800 degrees.

CRUISE******************************************


Reduce power to 14,200 RPM and temps below 800 degrees.

Set HPC levers to "on."

DESCENT*****************************************


Normal: 11,000 RPM/torque pressure 60 psi/170 kts.
1200-1400 fpm.

Cruise: 14,200 RPM/240 Kts./1200-1700 fpm.


PATTERN AND APPROACH*****************************


140 Kts. and 10 degrees.

Flaps 20 degrees at gear extension.

At OM turn on W/M system.

HPC levers set to "lock out."

At 600 ft. full flaps/110 kts.

Vref (90-105 Kts.) at threshold.

Close throttles on touchdown.

Props to GROUND position. (Full aft.)