The Horsa glider was a mainstay for RAF airborne operations during WW2. The most notable were D-Day itself and Operation Market Garden in Holland later in 1944. The Horsa was larger than the American Waco CG-4 glider and could carry 30 troops vs. 15 for the Waco. It could be towed by a C-47 but usually was towed by something more robust such as the Short Stirling or Handley Page Halifax.
This is a FSDSv3.51 project and has been compiled with Xtomdl into the SP-2 version of FSX. (It is not compatible with FS9). It has not been tested in Vista or DX10 since I don't have them. I do believe they will work since the textures are .dds. The glider has the usual animations plus the front door, steps and tail cone are animated. They open and close with the "Shift + E" command. The 2D panel and VC are based on a actual photo. The VC has working gauges and the flight controls are animated.
I have included a "Low Def" model of the Handley Page Halifax which is to be used strictly as a glider tug. The instructions to make it the default tug are given below. Both models are painted with D-Day Invasion stripes.
INSTALLATION: Unzip Horsa.zip into a temporary folder. Copy the Horsa and Halifax folders into the Airplanes folder in FSX. Remember, the Airplanes folder is under SimObjects in FSX. Open the gauges folder and copy the file Lockheed_Vega.cab into the Gauges folder of FSX. Copy it "as is" and don't open it or the gauges won't show. The glider shows as Airspeed Horsa in the Aircraft Selection menu. The Halifax does not show since it is set up as AI, only. Please note you create a flight situation with the glider and save it. You must call for the tow plane every time you open the flight.
CHANGE TOW PLANE: The .cfg file for the Halifax is already set up for this process, so nothing has to be done with it. The default tow plane is the Maule_M7_260C. A small change must be made to the Maule .cfg file to substitute the Halifax. Go to the FSX Airplanes folder and open the Maule_M7_260C folder (NOT THE SKI VERSION). Open the aircraft .cfg file with notepad. Scroll down to the entry [fltsim.5] as this is the default tow plane. Rename the title entry with slashes or I just added double xx. Here is my entry:
[fltsim.5]
title= Maule M7 260Cxx
sim=Maule_M7_260C
model=
panel=
sound=
texture=
kb_checklists=MauleM7260C_check
kb_reference=MauleM7260C_ref
Now, when you hit Ctrl+Shift+Y to call for a tow you will get the Halifax rather than the Maule.
LEGAL: This project is released as freeware. You may repaint it, make panel modifications and upload to this or another website as long you give me credit for the original design. You need my written permission to use any of these files for commercial purposes. Be advised this project will be uploaded by me to www.SurClaro and www.simviation.com. If you find it and download from another site, I am not responsible for the integrity of the files.
This airplane should not hurt your computer but I am not responsible if you think it causes problems.
This project and my earlier Waco CG-4 were inspired by my trip to Holland in 2006. My wife of 12 years is from the Delft area and that was our 4th trip together. We spent several days in and around Arnhem and visited the cemeteries and museums. I learned much about Operation Market Garden ("A Bridge Too Far"). When we returned I found out one could tow a glider in FSX and so these projects were born.
