POSKY Boeing 757-200 Hooters Air N750WL Textures only.
*****************************************************************
This is a repaint of the Hooters Air 757. It is actually operated on behalf of Hooters by Pace Airlines. I've spent quite a bit of time on this, but if it wasnt for the fact that there is more to life than repainting planes, I could actually spend quite a bit more time improving one or two areas I'm still not satisfied with. I think the overall effect is quite pleasing, and in any event, you should be on the flightdeck, not outside admiring your plane all the time! The original is very clean, but I have added a little dirt under the windows and elsewhere just to satisfy those of you who like these things. In real life I very rarely see a dirty plane. All the ones which visit my airport look very smart. When I painted the textures I set transparancy of the dirt at 30%, so I can turn it up in a couple of years!
I note that , down below, it says 'atc_heavy=0'. My understanding, courtesy 'Airways' magazine is that most 757s are 'heavy', so you might want to change the '0' to '1'
Have fun flying!
Gerry McLaughlin gmcl122@aol.com
ps. Thanks to Troy Prybyski,whose excellent photos at Airliners.net were very helpful in confirming the layout of the colours. Unfortunately, I couldnt find a photo of the other side, so the window layout might not be correct.
Installation
**************
you Need to install a Project Opensky B757-200 with RB211-535E4 Engine
1).Copy folder 'texture.hootr' to the folder which has your Posky 757-200 with RB211-534 engines. Open up the Aircraft config. folder and cut and paste the following section into it, substituting the next number for the letters'XXX'(without the inverted commas!)
If you dont have any other repaints, the number will be 1. Insert it after the previous similar entry.
[fltsim.xxx]
title=Project Opensky Boeing 757-200 Paintxxx
sim=B757-200-RR-RB211-535E4
model=
//add the two letters VC for the VC model
panel=
sound=
texture=hootr
ui_manufacturer=Project Opensky
ui_type=757-200
ui_variation=Hooters Air
description=Project Opensky \nBoeing 757-200\nVersion 2004.8.0\n\nFS2004 Only\n\nEngine Type: RR RB211-535E4\n\nModel Designers\n Lee Rosario\n Albert Bouwman\n C. Vincent Cho\n Hiroshi Igami\n\nFlight Dynamics Designer\n Warren C. Daniel\n\nMaster Texture Designers\n Jaco du Preez\n Ben Hewitt\n\nTechnical Resource-QC\n Nick Peterson\n Simon Ng\n\nFor proper operation: See B757 manual at: \n www.projectopensky.com
atc_heavy=0
-Stop cut and pace above this line----------------------------
*******************************************************************************
Copyrights:
This aircraft is made by Project OpenSky
Model Designers : Lee Rosario, Albert Bouwman, C. Vincent Cho, Hiroshi Igami
Flight Dynamics Designer : Warren C. Daniel
FDE Advisor's : Nick Peterson, Simon Ng Hin Tat
Tested : Project-Opensky Members
Master textures : Jaco du Preez & Ben Hewitt
- Dynamic shine
- Wingview or Virtual Cockpit
- Opening Doors & cargo doors
- 3d Flight Attendants in the cabine
- All normal animations
- realistic FDE
- first appearance of accurate C32A specific FDE, with 757-200 variants
- accurate dimensions
- accurate specifications
- accurate flight performance based on performance charts
- accurate flight performance based on certified pilot input
- full damage profiles for major body locations, flaps, struts, tires and engines
- different engine variants
- different engine performance, thrust maps, and fuel burn per different engine type
- different and accurate gauges based on engine type and performance
- default and alternate gear points for aircraft look vs. performance feel
- full operations manual complete with speed charts
- new detailed lighting effects for FS2004
Install:
Paint the different texture sections with the correct engine and wing types etc in Photoshop, PaintShop Pro or other program then put the painted texture files into the texture folder of your paint.
Both of the fuse types are included..if the airline you are painting uses a different amount of windows..delete and add as required in a texture editing program.
All the wing types are also included..check pictures on www.airliners.net to referance.
After finishing the paint you are able to upload the textures to www.SurClaro.com..DO NOT upload to www. or other sites without asking for permission from us. Before uploading please let us know on our forum which can be found on our site! :www.projectopensky.com
Door assignments for the Project Opensky Boeing 757-200.
PAX door 1 = Shift + E
PAX door 2 = Tailhook
Normal lugage doors = Shift + E + 2
Big Cargo door = Wingfold
********** COPYRIGHT AND DISTRIBUTION **********
This aircraft is released as FREEWARE.
Copyright (C) Project OpenSky . All rights reserved.
**** MODELS or FDE's CANNOT BE MODIFIED, RECOMPILED or REDISTRIBUTED ****
-For painters please see our webpage we are open for paintings.
-For any other changes you must ask permission to the Author.
-No charge may be made for this package
-This Aircraft may not be bundled with any other package ( freeware or payware )
-The use of this aircraft is at your own risk, the author cannot be held responsable.
