FS2004 DC-9 Panel - First Officer version
James Waters
Jamwaters@aol.com

I call it, "The panelled panel" - for some reason, the design took on a quality of wood
paneling on the autopilot section. I attempted to sort of play with it to get a more
metallic feel. Finally, I just thought, well, it's an Executive DC-9 panel with plush
leather from Corinth and a laminated and finished wood-panelled autopilot portion. JW.

This file is freeware - If you wish to make a gratuity, please see bottom for address information.

Contents:

1) File-name - "Unzip to Panel" - includes bitmaps, panel.cfg file
2) File-name - "Unzip to Sound" - includes gauge sounds - for MAIN FS9 Sound file
3) File-name - "Unzip to Gauges"- includes freeware gauges from default FS9 or other downloaded
gauges - thanks to those designers at FPDA and other designer/software engineers for the
freeware use of those gauges.
4) File_id.diz
5) Readme - this file



To Install:

Unzip the panel to the "panel" file in desired aircraft, the sound to MAIN FS9 Sound
file, and the gauge file to the FS9 gauge file.

Known issues

1) For some reason, the autopilot only seems to be incrementing in batches of 10 for
degrees and 1000's for altitude. The autopilot Nav intercepts but the panel is unable to
increment/decrement to a direct heading - only to 10 degree headings; the altimeter selected
is also limited to whole 1000's of feet.

You may not experience these problems.

IF YOU HAVE A "SOUND GERFLUGEN" error message, either attempt to search for that missing
sound file or delete the sound gauge from the list of gauges in the "Panel.cfg" file that
is causing the problem.

I would like to thank Charmian W. and Lacey L. for their help in this project.

A donation of $3.25 is greatly appreciated. Mail to:

James Waters
Parkway Office Towers
2303 SW 334th Pl., Suite #P-9
Federal Way, WA
98023
jamwaters@aol.com