FS9 / FSX CONCORDE COLLECTION.
Includes new model, four new textures, VC, Passenger's views, full animated parts, and INSTRUCTIONS FOR GAUGES ON FSX - COCKPIT / VC MODE !! - gauges from FS9 needed - (or use default B747-400 PANEL, so gauges will not appear on VC mode). GAUGES NOT INCLUDED: you have to download MR. FRANCISCO SILVA's wonderful panel: "fsconcpn.zip" wich will also provide afterburn effects. Other files suggested: "nlf_v2.zip" and "njs_final.zip" (BEAUTIFUL lights and smoke effects) by Nick Needham. Also MR. KALON JEFFRIES's sound package: "cncsstsn.zip", and the experience will be THE BEST!!!!!. NO FIXES NEEDED. By Libardo Guzman.

----------------------------------------------------------------------------

If you want to make a free donation to me, please let me know.

---------------------------------------------------------------------------

INSTALLATION:

- remove previous "1CONCORDEGA" if you have installed it.

(YOU DON'T NEED THE FOLLOWING A - B STEPS IF HAVE INSTALLED "CONGA.zip" PREVIOUSLY):

A - Download Mr. FRANCISCO SILVA's panel but don't install it; copy the COMPLETE FOLDER called "KO_F16_FX" into your FS9/FSX main GAUGES folder; copy the effects files into your FS9/FSX main EFFECTS folder.

B - (Optional) Download Mr. NEEK NEEDHAM's "nlf_v2.zip" and "njs_final.zip" files, wich will provide effects for engines; remember to follow his instructions: you need to go cockpit view first; if not, smoke effects won't appear.

----------------------------------------------------------------------------

FS9:


- Place the folder called "1CONCORDEALLGA" into your FS9 main Aircraft
folder.

- Open the folder called "FS9_FILES" and copy its contain into your new installed "1CONCORDEALLGA" folder.

This model It will appear on the main menu under AEROSPATIALE

--------------------------------------------------------------------------

FSX:

- Place the folder called "1CONCORDEALLGA" into your FSX main SimObjects/Airplanes folder.

- Open the folder called "FSX_FILES"and copy its contain into your new installed "1CONCORDEALLGA" folder.

- Open your FSX STOCK b747-400 / panel, make a back up of its panel.cfg file.

- Open the folder called "FSX_panel_CONFIGURATION" included into "FSX_FILES" folder; copy/paste the included panel.cfg into your FSX / STOCK B747-400 / panel , replacing the existing one.


- When running FSX, FIRST YOU MUST LOAD A STOCK AIRPLANE AND LET THE SIMULATOR RUN. CHANGE VIEW TO COCKPIT AND EXTERNAL; AFTER THAT YOU CAN LOAD THIS CONCORDE. IF YOU DON'T DO THIS, ENGINES WILL NOT TURN ON AND ZOOM OVER EXTERNAL VIEW WILL NOT WORK PROPERLY; I couldn't fix this, I'm sorry.



XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX


!!!!!!!!!INSTRUCTIONS FOR GAUGES ON FSX / COCKPIT AND VC MODE !!!!!!!:

You must have these three gauges from FLIGHT SIMULATOR FS9:

concorde.gau
kingair.gau
Kingair_radio.gau

-Copy them into your FSX/GAUGES main folder.
When loading the concorde, accept to run unknown author's gauges.

-OPEN the the folder called "FS9_FILES", and COPY the folder called "panel" into your installed "1CONCORDEALLGA" (in FSX) replacing the existing one.



XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX


CONTROLS:

Full animated parts, using tipical commands:
Passenger door: press ""SHIFT+E".
Other doors: press ""SHIFT+E+2".
Extending landing lights: press "/".
Extending nose and visor for taking off and first aproaching procedure (not faster than 325): press "F7"once.
Extending nose and visor for landing: press "F8" (full flaps) once (no faster than 270).
Crew's movements can be seen on exterior view and VC by animating rudder and landing gear.
Reverse: press "F2" just after touching.

You must become an expert pilot for flying this plane, specially for landing:
Don't try to do it from cokpit, because won't see the runway on final approach; do it from VC mode, using zoom out once.
Trim will help you to keep right angle while flying (first time to do it will be when taking off.....); use it as I suposse it will be in real, to keep gravity center leveled while fuel is displaced front / back.........

--------------------------------------------------------------------------

Since I have (very) little knowledge about gauges, I listed them from MR. FRANCISCO SILVA's panel:

"fsconcpn.zip"

You'll find I made 10 virtual functional surfaces for VC cockpit:

P1 - UPPER PANEL
P2 - UPPER PANEL
P3 - UPPER PANEL
P4 - COMPASS
P5 - MAIN PANEL
P6 - MAIN PANEL
P7 - MAIN PANEL
P8 - MAIN PANEL
P9 - CENTRAL PEDESTAL
P10 - CENTRAL PEDESTAL

They are all capable to be worked from panel.cfg to install functional gauges.

---------------------------------------------------------------------------

CREDITS.

This project has become real thanks to
God in first place,
my family,
my nephew LUIS FELIPE ABAD,
MR. KEITH SEMMLER
MR. TOM GIBSON (Calclassic)
Mr. GREG PEPPER (Calclassic),
Mr. FRANCISCO SILVA (author of used listed gauges and afterbur effects),
Mr. NICK NEEDHAM (suggested smoke and lights effects),
MR. KALON JEFFRIES (suggested sound),
MR. LEE ICE (Cockpit diagrams for Concorde),
Someone who told me about engines's information, I don't remember who, please excuse me....,
MR. EDUARDO FADUL,
MR. EDUARDO JARABO,
MR. DAVID LAWRENCE,
MR. JOSE J. GONZALES
FRIENDS from Free Flight Forum, who took a lot of their time to help me.

VISUAL MODEL: LIBARDO GUZMAN.
AIRCRAFT.CFG AND AIR.CFG FILE: by LIBARDO GUZMAN, based on MICROSOFT FS9's B737 AND B747 stock models
PANEL.CFG: LIBARDO GUZMAN, based on Mr. FRANCISCO SILVA's .
LISTED GAUGES: Mr FRANCISCO SILVA.
ANIMATION. LIBARDO GUZMAN.
PANEL AND V.C. PANEL: LIBARDO GUZMAN.
TEXTURES. LIBARDO GUZMAN.

Also want to thank all those guys who have downloaded previous versions and supported me with kind comments.
Couldn't miss to mention AIRLINERS.NET site: What would we do without their contribution!
I want to thank also all those people who have realised fs works for public use.
PROGRAM SUPPORT: LUIS FELIPE ABAD, TOM GIBSON.

THANKS TO ALL OF THEM.

---------------------------------------------------------------------------

NOTICE: Crew's faces cannot be changed if you repaint the plane and release it to the internet. All faces must be left as is. Also, I would appreciate if you send a copy of any repaint or modifications over aircraft.cfg or panel. You should send any modifications of this aircraft to

guzman_artes@yahoo.com

These files are for free use and enjoyment of individual hobby flightsimmers but the copyright for the original work remains with me and any other persons who have contributed to the work. This package is FREEWARE. COPYRIGHT of this Plane/Panel belongs to authors. Nothing in these files should harm your computer, but you use them at your own risk.

ALL RIGHTS RESERVED

I am also offering other models:

C46GA.zip - (CURTISS COMMANDO)

ALL707.zip - (BOEING 707 COLLECTION).

Take a look at the included JPG pictures!

Libardo Guzmán García
guzman_artes@yahoo.com