INSTALLATION:
_________________________________________


Unzip BSG_Viper7_2.zip and locate aircraft folder,
and paste to FSX/simobjects/airplanes/

{make sure its not double foldered),

locate effects folder inside the aircraft main,
copy all the stuff inside, Not the folder...
and paste to FSX/effects/

__________________________________________


==- Revision 2 additions 04/12/07

Static VC
animated transparent canopy
animated gear
gun FX (trigger fires guns when gear are UP)
in panel radar for FSX Deluxe users( see radarpanel readme)
exterior logo lighting for night ops
==-


FEATURES
---======---
- Maximum Performance - full envelope
- capable of FSX Max speed; (2667 kts/ GPS-GS)
- Stable and Strong under Extreme G loads
and maximum dynamic pressures
- Ultra efficient , High Thrust , Vectored Thrust
- SuperSpoilers
- Deflection flaps for hovering flight


NOTES:{{ use restraint }} BE SMOOTH AND GENTLE FOR BEST RESULTS

spoilers are for landing, normal approach goes...
@ 45,000 mach 4.6, power off, 8 miles out, down to 1500 kts, pulse spoiler, down to 800 kts, throttle up to 35 %
..10,000-little wobble this low, keep airspeed below 500 to control buffeting
= Using 50% throttle or less, at this point,
= is necessary for (jet like) performance
...spoilers out - throttle full, 128kts pick a spot.
ease back throttle, 27kts starting to drop in,
full rudder helps me spin on a dime into position
5ft 2kts , 1 notch flaps and use power to fill in
plunk - parking break set, power min

{{ use restraint }}{{ use restraint }}{{ use restraint }}{{ use restraint }}

.. . .. . .. . .. . .. . .. . .. . .. . ..
zero flaps - normal flight
1 notch flaps - slow hover flight, (blimp like)
2 notches - full hover (cloud like)

spoilers out max power - 120kts, slow flight (cessna like) but...(extreme manueverabilty)
spoilers out min power - 0kts, (kite like)
spoilers in max power - Mach 4.5, (missile like) = {{ use restraint }}
spoilers in min power - 212 kts level flight
.. . .. . .. . .. . .. . .. . .. . .. . ..

for MS-FSX By Bruce Fitzgerald
fitzgeba@hotmail.com
߃