BUTLER MEMORIAL AIRPORT KBUM
BUTLER, MISSOURI
BY
JOHN B. LONEY, JR.
_______________________________________________________________________________________________________
ABOUT THE AIRPORT:

Butler Memorial Airport serves Butler and Bates County and is owned by the City Of Butler, Mo. The paved runway extends for 4000 feet. The facility is at an elevation of 892 feet at a distance of about 2 miles from Butler.

Airport Operational Statistics:

Aircraft based on the field: 19
Single engine airplanes: 17
Ultralights: 2

Aircraft operations: avg 120/week
Transient general aviation 68%
Local general aviation 29%
Air Taxi 3%
Military <1%
_______________________________________________________________________________________________________
ABOUT THE SCENERY:

Well I was thumbing through a book that lists all of the public airports in the USA and the page fell open to Butler Memorial. That's how I came to do Butler. Again I employed EZ Scenery to place some Rwy12 objects. There are some non EZ objects that cannot by placed with EZ Scenery so you have to go to the program the objects were designed for. Those who have Lago's FSE will see the dynamic scenery on and off airport grounds. Watch for a fuel truck crossing a couple of taxiways. This scenery has a challenging approach to runway 36. Trees! You can almost pick the leaves off the branch, that's how close you come. According to information from the internet, there are 19 planes based at the field. I actually put in 26 parking spaces, so there's a few extra parking spaces for you. There are no twin engine planes at the field so the accompanying flight plans are of single engine planes only. I hope you enjoy this facility.
_______________________________________________________________________________________________________
ABOUT THE AIRCRAFT:

The aircraft used for the scenery startup is the Cirrus SR20. gkcirr.zip and gkcir_04.zip

The aircraft used in the flight plans are listed below:

AC# Type/Livery Zip File
22,24 Cessna Skyhawk 172SP default
26,27 Cessna Skylane 182S default
49 Mooney Bravo default
51,53 Piper Cherokee 180 default
121 Piper Arrow III ddpa383a.zip
129 Cessna Skylane 182RG c182rg04.zip
187 Cirrus SR20 gkcirr.zip & gkcir_04.zip
188 Diamond Katana DA20 Search SurClaro or SurClaro.com
191 Maule MT7-260 Search SurClaro or SurClaro.com
199 Zenair CH801 ch801_v3.zip
208 Beech Bonanza V35B bv35v04.zip




Of course, you can exchange the aircraft for ones you like. There is a copy of the flight plans source file included.
_______________________________________________________________________________________________________
THANKS TO:

Abacus for EZ Scenery, Rwy12 team and contributors
__________________________________________________________________________________________________
INSTALLATION:

Author's Note:

After receiving many emails, I find that I am a little off the beaten path. My FS file structure is not the default setup. So as you read these instructions, keep in mind that most of the files will work from anywhere as long as FS knows where they are. If your file structure is C:\Programs Files\Microsoft Games\Flight Simulator 9\ it's ok. Just place or check to verify that certain files are in certain folders. I will refer to the above structure as the DEFAULT FILE STRUCTURE, and the following file structure as MY FILE STRUCTURE. Which is: D:\fs2004\ and my scenery files are in D:\fs2k4_scenery\.
I have it this way because I've also done scenery for fs2002 and I didn't want to get the two versions mixed up. (Bet'cha can't guess what the folder name for the fs2002 scenery is). So in explaining where the files go, I'll try not to confuse anyone, but if I do, please contact me for clarification.

AFTER UNZIPPING THE FILE kbum_v1.ZIP TO A TEMPORARY FOLDER, HOPEFULLY, YOU ARE READING THIS README FILE.

If you don't have them already, download Lee Swordy's Traffic Tools v2x and AFCAD2x. Follow the instructions from the files and install them onto your system. While you're at it, download the texture files necessary for this scenery and put them into the main FS texture folder. They are: ASDv2.1, Nova, Nova Gold and NovaSim textures, plus my own custom textures. All are available for free at my website, www.lfssd.net (the "l" is an L, not a one). You also should download Rwy12 objects/textures. You don't need the complete Rwy12 program. (See the Rwy12 open letter on SurClaro or SurClaro.com search file rwy12_-_open_letter.zip). You can get the EZ Scenery libraries/textures from Abacus' website at http://www.abacuspub.com/pub/AbacusEZLibraries.exe.

Using the folders switch, unzip the file kbumscen.zip to the drive where you have your FS. Using your file manager (Windows Explorer) check to make sure that all the files are in their proper folder.

C:\My Documents\Flight Simulator Files should have the .FLT and .WX files (This is for the Windows XP users.) For all other OS the .FLT and .WX files are under the main FS folder. (I think)
Drive:\FS9 folder\Addon Scenery\scenery should have AF2_*.bgl (Refer to Default file structure if different)
Drive:\FS9 folder\Scenery\World\scenery should have TrafficButlerMem.bgl
Drive:\fs2k4_scenery or Addon Scenery folder\KBUM\scenery should have the kbum_*.bgl scenery files (The KBUM folder can also go under the Addon Scenery folder if you wish)
If you have Lago's FSE 2004, then check the following:
Drive:\FS9 folder\Lago\FSE\Data\should have ButlerMemorial.SE2 for Static scenery and
Drive:\FS9 folder\Lago\Common\Tracks\should have ButlerMemorial.OSC For dynamic scenery

Drive:\FS9 folder\KBUM\xml\contains the Rwy12 xml files for those who need the source files for the Rwy12 objects. If you do not wish to change any of the Rwy12 objects, you can delete these files.

Activating the scenery in FS9:

1. Start FS
2. At the Menu, select Settings
3. Then select Scenery Library
4. Select Add Area
5. Go to where you have the scenery folder in the file structure and just open the scenery name folder ie; (KBUM) Then click OK
6. Set the priority using the "D" Key or the Move Down button or the "U" Key or the Move Up Button
7. Click OK
8. Close FS and re-start
9. At the menu select "Select a Flight"
10. Scroll down to your flight, hightlight and click FLY NOW
You're at the airport of your choice. Go fly.

You should be ready to fly. Happy landings!
__________________________________________________________________________________________________
Legal stuff. Copyright and Distribution
--------------------------

This scenery is freeware. Copyright John B. Loney, Jr. Feel free to add or change this scenery. Especially if you know a more accurate placement of items. You do not have my permission to make any monetary gain from this scenery. It started out as freeware and it shall remain freeware.
- The author's rights and wishes concerning this archive must be
respected.

Copyright 2006 by John B. Loney, Jr. All Rights Reserved.
____________________________________________________________________________________________

Disclaimer
----------

I do not accept any responsibility for any damage to any system as a result of running this scenery.
____________________________________________________________________________________________

Contact:
--------
As usual, I welcome any comments. I will try to answer as many as I can.

E-Mail: Website:
jbloney@comcast.net www.lfssd.net

Have fun and enjoy.