INDIANAPOLIS EXECUTIVE AIRPORT KTYQ
(formerly Indianapolis Terry Airport)
By John B. Loney, Jr.
October 10, 2005
_______________________________________________________________________________________________________
ABOUT THE AIRPORT:

Indianapolis Executive Airport (Formally known as Indianapolis Terry Airport) KTYQ, serves Indianapolis and Boone County and is owned by R. Vansickle. The paved runway extends for 5500 feet. The facility is at an elevation of 922 feet at a distance of about 14 miles from Indianapolis.

Airport Operational Statistics

Aircraft based on the field: 74
Single engine airplanes: 38
Multi engine airplanes: 6
Jet airplanes: 6
Helicopters: 1
Gliders airplanes: 20
Ultralights: 3

Aircraft operations: avg 77/day

Transient general aviation 50%
Local general aviation 44%
Military 4%
Air Taxi 3%
_______________________________________________________________________________________________________
ABOUT THE SCENERY:

This scenery is yet another request from a member of the flightsim community. Being a small facility, it didn't take long to do. However, the airport is growing. Perhaps the name change is one of the indicators of it's growth. Watch your jet landings. If you come in too hot you can run out of runway.........FAST! I hope you enjoy this one. Happy Landings!
_______________________________________________________________________________________________________
ABOUT THE AIRCRAFT:

The aircraft used for the scenery startup is the Beechcraft Duke B60 by Chuck Dome duke04.zip

The aircraft used in the flight plans are listed below:

AC# Type/Livery Zip File
1 Beechcraft Baron 58 default
2 Beechcraft King Air 350 default
22-24 Cessna Skyhawk 172SP default
25,27 Cessna Skylane 182S default
44 Learjet 45 default
49 Mooney Bravo default
51-53 Piper Cherokee 180 default
128 Cessna Citation X ctnx04.zip
174 Beechcraft King Air B200 kab2004.zip
175 Beechjet 400A bj404.zip
187 Cirrus SR20 gkcirr.zip and gkcir_04.zip
271 Beechcraft Duke B60 duke04.zip



Of course, you can exchange the aircraft for ones you like. There is a copy of the flight plans source file included.
_______________________________________________________________________________________________________
THANKS TO:

Charlie Shoemaker for his KTYQ suggestion.
__________________________________________________________________________________________________
INSTALLATION:

Author's Note:

After receiving many emails, I find that I am a little off the beaten path. My FS file structure is not the default setup. So as you read these instructions, keep in mind that most of the files will work from anywhere as long as FS knows where they are. If your file structure is C:\Programs Files\Microsoft Games\Flight Simulator 9\ it's ok. Just place or check to verify that certain files are in certain folders. I will refer to the above structure as the DEFAULT FILE STRUCTURE, and the following file structure as MY FILE STRUCTURE. Which is: D:\fs2004\ and my scenery files are in D:\fs2k4_scenery\.
I have it this way because I've also done scenery for fs2002 and I didn't want to get the two versions mixed up. (Bet'cha can't guess what the folder name for the fs2002 scenery is). So in explaining where the files go, I'll try not to confuse anyone, but if I do, please contact me for clarification.

AFTER UNZIPPING THE FILE ktyq_v1.ZIP TO A TEMPORARY FOLDER, HOPEFULLY, YOU ARE READING THIS README FILE.

If you don't have them already, download Lee Swordy's Traffic Tools v2x and AFCAD2x. Follow the instructions from the files and install them onto your system. While you're at it, download the texture files necessary for this scenery and put them into the main FS texture folder. They are: ASDv2.1, Nova, Nova Gold and NovaSim textures, plus my own custom textures. All are available for free at my website, www.lfssd.net (the "l" is an L, not a one). You also should download Rwy12 objects/textures. You don't need the complete Rwy12 program. (See the Rwy12 open letter on SurClaro or SurClaro.com search file rwy12_-_open_letter.zip)

Using the folders switch, unzip the file ktyqscen.zip to the drive where you have your FS. Using your file manager (Windows Explorer) check to make sure that all the files are in their proper folder.

C:\My Documents\Flight Simulator Files should have the .FLT and .WX files (This is for the Windows XP users.) For all other OS the .FLT and .WX files are under the main FS folder. (I think)
Drive:\FS9 folder\Addon Scenery\scenery should have AF2_*.bgl (Refer to Default file structure if different)
Drive:\FS9 folder\Scenery\World\scenery should have TrafficIndianapolisExec.bgl
Drive:\fs2k4_scenery or Addon Scenery folder\KTYQ\scenery should have the ktyq_*.bgl scenery files (The KSDL folder can also go under the Addon Scenery folder if you wish)
Drive:\FS9 folder\Texture should have the following textures:
The ASDv2.1, Nova, NovaGold and NovaSim texture sets. With this download, the textures in the KTYQ/texture folder can be moved to the FS main texture folder if you wish.
If you have Lago's FSE 2004, then check the following:
Drive:\FS9 folder\Lago\FSE\Data\should have IndianapolisExecutive.SE2 for static scenery and
Drive:\FS9 folder\Lago\Common\Tracks\should have IndianapolisExecutive.OSC For dynamic scenery

Drive:\FS9 folder\KTYQ\xml\contains the Rwy12 xml files for those who need the source files for the Rwy12 objects. If you do not wish to change any of the Rwy12 objects, you can delete these files.

I added textures for this scenery to the texture folder under the scenery folder (KTYQ\texture). You can move them to the main FS texture folder. If it asks you if you want to overwrite you already have them and you can delete these if you wish.

Activating the scenery in FS9:

1. Start FS
2. At the Menu, select Settings
3. Then select Scenery Library
4. Select Add Area
5. Go to where you have the scenery folder in the file structure and just open the scenery name folder ie; (KTYQ) Then click OK
6. Set the priority using the "D" Key or the Move Down button or the "U" Key or the Move Up Button
7. Click OK
8. Close FS and re-start
9. At the menu select "Select a Flight"
10. Scroll down to your flight, hightlight and click FLY NOW
You're at the airport of your choice. Go fly.

You should be ready to fly. Happy landings!
__________________________________________________________________________________________________
Legal stuff. Copyright and Distribution
--------------------------

This scenery is freeware. Copyright John B. Loney, Jr. Feel free to add or change this scenery. Especially if you know a more accurate placement of items. You do not have my permission to make any monetary gain from this scenery. It started out as freeware and it shall remain freeware.
- The author's rights and wishes concerning this archive must be
respected.

Copyright 2005 by John B. Loney, Jr. All Rights Reserved.
____________________________________________________________________________________________

Disclaimer
----------

I do not accept any responsibility for any damage to any system as a result of running this scenery.
____________________________________________________________________________________________

Contact:
--------
As usual, I welcome any comments. I will try to answer as many as I can.

E-Mail: Website:
jbloney@comcast.net www.lfssd.net

Have fun and enjoy.