Norway Airports add-on for MICROSOFT FS2002 - Package 8
------------------------------------------------------------------
Authors: Kjell Arild Bersaas, Arne Sundsbö, and Jan Roar Röd.
Thanks to Manfred Moldenhauer. Without his SCASM "assembler" this project
would be impossible.
Fornebu airport is made by Charlotte Korsnes,
and the ground texture is provided by Bravida Geomatikk.
Static plane creators:
AIRBUS 330: C.Valiquette
ASW sailplanes: Roland Stuck
Boeing 737 Ceske Aerolinie : G.Lewis/J.Moons/P.Haak, paint: Mike Wallace
Boeing 737-700 Braathens LN-TUB: Bill Alderson, paint: Petter Skjaerstad
Boeing B757: Brian Quayle, paint: Emmanuel Parot.
Boeing B747-400 BA Cargo: Roberto Randazzo, paint: Jamie Curry
Bombardier Dash8 LN-WIG: Barry Blaisdell, paint: Arne Sundsbo
Boeing737-204 Ryanair: Brian Quayle, paint: D.Bracci
Boeing 737-4Y0 Air Europa : Jan Moons/Paul Haak, paint: Garry Lewis
Douglas DC3: John Kelley
Douglas DC9 SE-DAS: Brian Quayle, paint: Arnt Helge Haaland
Fokker F70: Kim Simmelink, paint: Felipe Maino e Taveira
General Dynamics F16A: Dick van Dijk
Lockheed C130H: Bill Alderson
Lockheed F104: Michael Gurezka
Republic RC3 Seabee: Dennis Simanaitis
Republic RF 84F: Massimo Taccoli
Docking system at Vaernes made by PTSIM - http://www.ptsim.com/
New fully functional Vigra VOR at 115.80 MHz and ILS at 111.95 MHZ is added.
Asker NDB, OA, is set to 352.5 kHz to avoid interference.
You will find the airports Bjorli, Dokka, Eggemoen, Elvenes, Frya, Gossen, Hokksund, Jan Mayen,
Jarlsberg, Meraaker-Oyan, Oppdal, Rakkestad, Reinsvoll, Setermoen, Ski, and Sunndal-Vinnu under
"Search Add-on scenery" in the GOTO AIRPORT menu.
!!!!!!!!!!!!!!!!!!
The files BODSTAT1.BGL, BGOSTAT1.BGL, GMOSTAT1.BGL, HAUSTAT1.BGL, MOLSTAT1.BGL, TRFSTAT1.BGL,
and VIGSTAT1.BGL contains static scenery. You may remove allor one of these files to increase
screen frame rate.
!!!!!!!!!!!!!!!!!!
Airports with specially made approach lights:
Bardufoss (ENDU)
Specially made approach lights for both directions(runway lights are standard FS2002)
Set NAV1 to a frequency between 108.70 and 114.20. This will turn on the approach lights.
When doing an ILS or VOR approach the lights will be turned on when you have tuned to
the frequencies necessary for these approaches.
Jan Mayensfield (ENJA)
Tune COM1 to 118.10 to make the runway lights turn on.
Vadso (ENVD)
Specially made approach lights for both directions(runway lights are standard FS2002).
Turn on by tuning Com1 to LLZ frequency 118.10
Hasvik (ENHK)
Specially made approach lights for both directions(runway lights are standard FS2002).
Approach lights are always lit.
Trondheim, Værnes (ENVA)
Specially made approach lights for both directions(runway lights are standard FS2002).
Approach lights are always lit.
Snowpiles at Bardufoss (ENDU) and Artillerisletta/Setermoen
-----------------------------------------------------------
Specially made and show up at these 2 airports in this package. The snow will only be visible
in the winterseason in FS2002. You can remove it by deleting the following files from
the norway_airports/scenery folder: endusne.bgl og endusnw.bgl and setermsn.bgl.
Terrain error at Jan Mayen:
---------------------------
FS2002 comes with an error at Jan Mayen. This error is made by Microsoft. You can
fix this error by using a fix made by Richard Ludowise. You will find the fix in
the AVSIM filelibrary: http://ftp.SurClaro.com/library/search.php?SearchTerm=n70fix.zip&CatID=Root.
Please read the instructions in this file to fix this terrain error at Jan Mayen.
This fix is recommended to be able to use our Jan Mayen scenery included in Norway airports.
I N S T A L L A T I O N
-----------------------
IMPORTANT: Please do remove the OLDER version BEFORE you install this
version of Norway airports. Please remove all previous norway airports
area's from the scenery.cfg before installing this scenery. Do NOT mix
this version with previous versions of Norway Airports.
2. Unzip the file: Norway_airports_scenery.ZIP into the "...\scenery" folder
3. Unzip the file: Norway_airports_texture.ZIP into the "...\texture" folder.
4. Start FS2002 and select WORLD and SCENERY LIBRARY.
5. Select ADD AREA and SELECT SCENERY DIRECTORY.
6. Find NORWAY_AIRPORTS and make sure that you finally will read
C:\flightsim\Norway_airports\scenery
under DIRECTORY ( depending on where yor files are located ).
Under SCENERY AREA TITLE you may now type NORWAY, for instance.
Click OK.
UNINSTALL: Delete the Norway_airport section in the file Scenery.cfg and
delete the folders containing the files.
