Embraer ERJ-145 Panel for FS2002. By John Rushby-Smith. Email: john@rushby-smith.fsnet.co.uk

INSTALLATION

1. Place the Panel folder in your FS2002/Aircraft/Embraer 145 folder (rename your existing Panel folder or move it to a safe place first!)
2. Open the Gauges folder and copy or move the gauges to your FS2002/Gauges folder.
N.B. The moving yoke is an adaptation of Chuck Dome's freeware Stickhand gauge.
The compass toggle on the left end of the glare shield operates a "BIG GPS" display.

3. To ensure fully functional radios I recommend adding the following text to your Embraer ERJ's aircraft.cfg file to replace the existing [radios] section if any.

[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1=1
Com.1=1, 1
Com.2=1, 1
Nav.1=1, 0, 1
Nav.2=1, 0, 0
Adf.1=1
Transponder.1=1
Marker.1=1

4. If your auto-throttle doesn't work, open the aircraft.cfg file and locate the [autopilot] section. Change the relevant bits to read as follows (or insert the following text):

autopilot_available=1
flight_director_available=1
default_vertical_speed=1800.000000
autothrottle_available=1
autothrottle_arming_required=1
autothrottle_takeoff_ga=1
autothrottle_max_rpm=90.000000
pitch_takeoff_ga=8.000000

LEGAL STUFF: The design is copyright John Rushby-Smith, January 2002, and may only be modified or redistributed with my permission. Although I have tested the files and find they work properly on my computer, you install these files at your own risk. I take no responsibility for any damage to your computer or software that may result from the installation of the files, however caused.