The Dornier Do 28B was a twin-engine STOL utility aircraft, manufactured by Dornier Flugzeugbau GmbH. It is operated by the Israeli AirForce's "Flying Camel" squadron and is was for observation and aerial patrol, during the Six Days War and Yom Kippur War.
The Do 28 was developed from the single-engine Do 27 at the end of the 1950s. The design shared the high-wing cantilever layout and the lift augmentation devices of the Do 27, together with the rear fuselage which seated six passengers.
The Do 28B-1 was a Do 28A with enlarged nose, additional fuel tanks, increased tailplane area and powered by 290 hp (220 kW) Lycoming IO-540 fuel injected engines and three-blade constant speed propellers, 60 built.
General characteristics
Crew: 1
Capacity: 7 passengers
Length: 9.00 m (29 ft 6 in)
Wingspan: 13.80 m (45 ft 3½ in)
Height: 2.80 m (9 ft 2 in)
Wing area: 22.7 m² (241 sq ft)
Airfoil: NACA 23018 (modified)
Aspect ratio: 8.5
Empty weight: 1,730 kg (3,806 lb)
Max takeoff weight: 2,720 kg (5,984 kg)
Powerplant: 2× Lycoming IO-540A air-cooled flat-six, 216 kW (290 hp) each
Propellers: Harzell three-bladed propeller, 1 per engine
Propeller diameter: 2.03 m (6 ft 8 in)
Performance
Never exceed speed: 334 km/h (180 knots, 207 mph)
Maximum speed: 290 km/h (160 knots, 184 mph) at sea level
Cruise speed: 242 km/h (130 knots, 150 mph) at sea level (econ. cruise)
Stall speed: 70 km/h (38 knots , 44 mph)
Range: 1,235 km (668 nmi, 768 mi) (max payload)
Ferry range: 1,680 km (957 nmi, 1,100 mi) (auxiliary fuel)
Service ceiling: 6,300 m (20,700 ft)
Rate of climb: 7.1 m/s (1,400 ft/min)
Original FS5 model creator: Shlomo Hakim.
All reworked to CFS1 with new textures, damage profile and moving parts: Edmundo Abad 2010.
----------------------------------------------------------------------
This virtual model represent the IAF's Dornier Do 28B # 022, 'Flying Camel' squadron.
Special thanks to Christian Maas for his excellent tool Hex-editor XVI32 and Chuck Dome by his MDL file viewer. Without their tools, I might not have been able to assign new textures to the original model.
I have included new textures, moving parts and damage profile for use with CFS1, with ficcional armament of windows machine guns, rockets and bombs.
----------------------------------------------------------------------
Installation CFS
1. Unzip to Temporaly directory "do28-B-Israel.zip".
2. Copy "do28-B-Israel" folder to X:\CFS\aircraft directory.
3. Copy "gauges" folder to X:\CFS\gauges directory.
