Panel & Soundconfig by Johan Nauwelaertz de Agé /NAUWA MODELS SWEDEN/
http://home3.swipnet.se/~w-35500/
nauwa@thevortex.com
Since I love to fly around in my Autogyro and found a similar one for FS5
I thougt it might be a good idea to convert it for FS98.
To get the right Autogyro feeling I decided to make a suitable panel and
the best thing to do was to take a picture of the panel in my gyro.
Two instruments on the original panel has no equivalents in FS98 and are not
so useful, so I left them as static pictures without function to achieve the
photo real panel I want to.
SOUND, SOUND, SOUND !!!
Since there is a very special sound when flying an autogyro, I have tried
to reproduce a similar sound by mixing the cessna sound with rotor sound
from Bell206B. I did not find a better sollution than copy the sound files
from the C182/sound directory together with the xhe4 file from Bell_206B/sound
directory to the sound folder in Autogyro. If you wish to do this.
STRONGLY RECOMENDED, I have included the new sound.cfg file to put in the
Autogyro/sound folder, Otherwise it will run using the standard cessna sound.
NOT SCALISH NOT HALF THE FUN.
Please enjoy, and all feedback (good or bad) are wellcome