D-Type of A-7 Corsair II is a production type for USAF and ANG(National Guard).
The TISL laser instruction device was installed under Intake.
Moreover, it differs from the navy's machine, and it has the fuel receiving mouth in the upper part of the main wing root.
Length: 14.0 m (46')
Width: 11.8 m (38' 9")
Height: 4.8 m (16')
Wingarea: 34.8 sq m (375.0 sq ft)
Empty Weight: 8,839 kg (19,490 lb)
Gross Weight: 19,047 kg (41,998 lb)
Max Weight: 19,047 kg (42,000 lb)
Propulsion
No. of Engines: 1
Powerplant: Allison TF41-A-2
Thrust (each): 6,802 kg (15,000 lb)
Performance
Range: 3,671 km (2,280 miles)
Max Speed: 1,115 km/h (602 kt 693 mph)
Climb: 3,852 m/min (12,640 ft/min)
Ceiling: 13,106 m (43,000 ft)
-----------------------------------------------------------
[About the installation]
The airframe must copy the \A-7D Corsair II folder as it is in the Aircraft folder of FS2002 or FS2004.
\FS2002(FS2004)
-----\Aircraft
---------\A-7D Corsair II
Please copy all files in the \gauges folder onto the gauge in the Gauges folder of FS2002 or FS2004.
A general gauge is saved for the gauge bundled this time.
Concorde, Beach_baron, EXTRA-300, and 737-400 gauges are necessary besides the bundled gauge.
It is necessary to introduce no possession of these gauges separately.
-----------------------------------------------------------
[About the operations]
A special key operation is not used for this model.
All aircraft that I made are free software.
The reprint and the repaint may go freely.
However, please defend the following conditions.
1.The change in contents of this file is prohibited.
(Please distribute it like the Zip file of the current state when distributing it. )
2.Please neither reverse-assembly nor never remodel it of the aircraft model.
3.Please open only the texture to the public when you open the repaint to the public.
(Opening in the state to bundle my aircraft model to the public is prohibited. )
4.It is prohibited to bundle and to open a new panel to the public to my aircraft model.
(Please open only the panel to the public.
It is included in this file, and remodeling the panel that uses the panel background and the change in the panel background are prohibited. )
5.I maintain the copyright of the aircraft model and the panel background.
6.The copyright of the gauge belongs to the author.
---------------------------------------------------------
[About the directions point in FS2004]
This aircraft can be basically used also with FS2004 because it is made with FSDS Ver. 2.24 .
However, the aerofoil tip might not be able to enter in the screen in the spot taking a picture view because of very wide the width of the aircraft.
Please switch to the spot taking a picture view with other aircraft when this state happens seeming this as it is because the magnification switch of the spot taking a picture doesn't operate well.
Afterwards, if this aircraft is chosen by selecting the aircraft, it is sure to be displayed by a normal magnification.
*******************************************************************
Please give mail to the following mail address when there is a recommendation of making the opinion and the thing that doesn't come.
