The Bücker Bü 133 Jungmeister (Young master) was an advanced aerobatic trainer of the Luftwaffe in the 1930s.
The Bü 133 was a development of the Bücker Bü 131 Jungmann two-seat basic trainer. It was slightly smaller and fitted with a more powerful engine, which gave it excellent aerobatic performance.
The Bü 133 served as an advanced trainer with the Luftwaffe, its aerobatic capability suiting it particularly for early training of fighter pilots.
It was manufactured under licence for the Swiss Air Force and for the Spanish air force by CASA. Approximately 50 aircraft were produced for each country.
General characteristics
Crew: one, pilot
Length: 6.0 m (19 ft 8.25 in)
Wingspan: 6.60 m (21 ft 7.75 in)
Height: 2.20 m (7 ft 2.5 in)
Wing area: 12.0 m² (129.17 ft²)
Empty weight: 425 kg (937 lb)
Max takeoff weight: 585 kg (1,290 lb)
Powerplant: 1× Siemens Sh 14A-4 radial piston engine, 119 kW (160 hp)
Performance
Maximum speed: 220 km/h (137 mph)
Cruise speed: 200km/h (124mph)
Range: 500 km (311 mi)
Service ceiling: 4,500 m (14,765 ft)
Original FS98 model creator: Captain Slug.
All reworked to CFS1 with new textures, damage profile and moving parts: Edmundo Abad 2010.
----------------------------------------------------------------------
This virtual model represent the Bucker Bu-133 # D-EGHV, NSFK Aerobatic team (Luftakrobatik Staffel).
This aircraft has civil registration which was carried both above the top and below the lower wings. This was one of the NSFK Acrobatic Flight machines in 1939.
Special thanks to Christian Maas for his excellent tool Hex-editor XVI32 and Chuck Dome by his MDL file viewer. Without their tools, I might not have been able to assign new textures to the original model.
This virtual model is up-scaled to obtain a better view in Combat Flight Simulator.
(for accurate scale in FS98, replace the file Bu-133.MDL by Bu-133.old.MDL and rename this as Bu-133.MDL). I have included new textures, moving parts and damage profile for use with CFS1, with ficcional armament of two 7.9 mm machine gun over the nose.
----------------------------------------------------------------------
Installation CFS
1. Unzip to Temporaly directory "Bu-133.zip".
2. Copy "Bu-133" folder to X:\CFS\aircraft directory.
