These files are Freeware!
Dont try to make money with them!

Original Aircraft.cfg by Wolfgang Piper. He made it for an one seat glider, I used it for my Eagle.
So if you want to use the Aircraft.cfg, you will have to ask Mr. Piper (www.fsglider.de -> Contact)
If you want to use my model, you will have to ask me: christopher_hardt@web.de
If you want to repaint it, you are allowed to di it :-) but before you make it public, show it to me please.



ISTALLATION:
just copy the Folder "Adler" out of the *.zip file into your Aircraft folder, wich is placed in the FS main folder.

You'll find the Eagle in your Aircraft Selection under Manufacturer: Natur (ist German for Nature)


(the following part is take from the original readme by W. Piper)

Now for takeoff

Line yourself up on the runway. Use the start engine command (Control+E) to enable VET.
Put full throttle on your joystick or press F4. Now you will wait 15-20secs then the glider will start to roll. Rotate and climb. Dont let the speed drop below 40kts or the glider becomes unstable.

Once you reach your required height press the quick engine stop key that you assigned. This disables VET and you can then fly on happily.

In real life on a good day you would probably get about 1000-1200ft I think, though you can gain as much height as you like using the VET, its up to you.

I enjoy using this, its much more fun than slewing up.

(end of the taken part)


I added a tailhook to the Aircraft.cfg, so the eagle can turn his wings back, like if hes going really fast.
it dont look very realitic, but this would be much more work, and for me ist ok this way.

All features listet:

steering over the tail of the bird
legs and feet are animated as gear
wings can be turned back by using the tailhook key
spoilers: a ring of plumes around of the eagles neck
rudder is linked to the head (an eagle sure really hasnt a rudder, but in FS he's got one.) rudder left=head turns left
rudder right=head turns right


another note:
the contact pinots in the Aircraft.cfg dont fit with the eagle. they still are from the original glider. id theres anybody who can and wants to
fix it, please do it, and pleas send me de fixed cfg file to christopher_hardt@web.de, thanks ;-)

Panel:
I didnt made a new panel, because i thins you'll fly this one from the tower sight :-) but if you fly it from the cockpit, imagine you are sitting iside of the eagle's beak ;-)

and now: have fun with your new Eagle :-)